Wooden Height Chart - Personalised Childrens Growth Ruler
Wooden Height Chart - Personalised Childrens Gr... from $109.00
A wooden height chart handmade by Little Miss Viking in New Zealand makes a great family keepsake and you can get your wooden growth ruler personalised for free, they are designed as a giant modern wooden ruler. Our wooden height charts are family heirlooms in the making. They make original personalised unisex gifts for Christmas, new arrivals, christenings, first birthdays, best of all they can move house when you do. No more lost history! By personalising them with a family name (rather than the child's), they can still be enjoyed if further new additions arrive later on. Being a stylish home accessory as well as being practical, the "Giant Rule" wooden height chart does not have to be hidden away in a child's bedroom or nursery and instead can be a centrepiece to the home in a hallway or kitchen. Add a customisation to your family’s height chart. Add text going vertically up the right side ie.”Our Growing Family” or “The Smith Family Rules. Max size is 600mm long and approx 10 cm high text size may be shrunk to fit. A great family keepsake, this pine height chart is the perfect way to keep track of your growing family. The wooden pine height chart is marked from 20cm to 200cm and is designed to be installed 20cm off the floor enabling plenty of room for skirting boards. Other personalisations you can make to your wooden height chart are, changing from cm to inches, changing where the numbers start to avoid skirting or get more height, requesting a custom font for the the personalisation. Top tip if you know anyone that wants a height chart buy them on the same order and it will reduce the freight costsWhen you measure your family you must write onto the wood with a normal ball point pen or pencil. DO NOT USE A PERMANENT MARKER as it will run/smudge. Fine tip Sharpie pens are sometimes suitable please do a test patch on the reverse side if you are unsure. Personalised height charts will have the numbers placed vertically. All non personalised height charts will have horizontal numbers. If you are not hanging immediately these must be stored flat. When hanging do not place in direct sunlight. All boards are dried and stored before being turned into charts. Environmental conditions can impact the chart- Do not place outdoors, in direct sunlight, in the direct path of a heater or heat pump.  Very Moist conditions do not suit wooden height charts.  Securing at the top and the bottom will prevent any bowing if placed in unfavorable conditions.The height chart comes with a saw-tooth hanger on the back that can be mounted on a 3m hook at 195cm off the ground.
Monogram Letter With Name Floral Wreath - Laser Cut Name Plaque
Monogram Letter With Name Floral Wreath from $29.00
A single floral wreath wood monogram creates sophisticated personalized walls and gifts. A wonderful addition to a family home or a girl's bedroom, these single letter floral monograms are decorative yet reserved. These signs are for indoors and look best with 12 character names or less. Easily mount them on a wall with blue-tac or a 3m velcro strip. (not included) Width varies depending on the letter chosen but is normally close to the height. Select your paint colour for your own preference, sides and back are not painted
Wall Name Plaque Free Personalisation - Dollie / 12cm - Laser Cut Name Plaque
Wall Name Plaque Free Personalisation from $25.00
Custom made Wall Name Plaque that is great for a children’s bedroom wall or door. The laser-cut wall name plaque is lightweight. Getting your one ordered is simple. The height is the measurement from the height of the capital letter all other letters will be in proportion to this. eg. Harper would be measured from the top of the H to the bottom of the H. We then adjust marginally to make sure the item will be strong enough to ship. This is for ONE name only ,Maximum of 10 letters per name if it is a hyphenated nsme two will need to be ordered.   We recommend using removable velcro/picture hanging strips to hang(not included). Please choose from one of the colours - For a natural wood look try bamboo here.  
Bamboo Sectional Height Chart - Height Chart
Bamboo Sectional Height Chart $89.00
This bamboo height chart comes in three sections that fit together using puzzle joints. Simply hang one section then add the next. The ultraportable lightweight design is perfect if moving. A wooden height chart made by Little Miss Viking in New Zealand makes a great family keepsake and you can get your wooden growth ruler personalised for free, they are designed as a giant modern wooden ruler. Our wooden height charts are family heirlooms in the making. They make original personalised unisex gifts for Christmas, new arrivals, christenings, first birthdays, best of all they can move house when you do. No more lost history! By personalising them with a family name (rather than the child's), they can still be enjoyed if further new additions arrive later on. Being a stylish home accessory as well as being practical, the "Giant Rule" wooden height chart does not have to be hidden away in a child's bedroom or nursery and instead can be a centrepiece to the home in a hallway or kitchen A great family keepsake, this bamboo height chart is the perfect way to keep track of your growing family. The wooden height chart is marked from 20cm to 200cm and is designed to be installed 20cm off the floor enabling plenty of room for skirting boards. Other personalisations you can make to your wooden height chart are, requesting a custom font for the personalisation.   FONT SELECTION-IS FOR PERSONALISATION ONLY. The numbers are the set font.PLEASE DOUBLE CHECK your order before processing and check your order confirmation. If your order comes through with a font change but no text entered for personalisation it will be made as a non personalised chart, Top tip if you know anyone that wants a height chart buy them in the same order and it will reduce the freight costs When you measure your family you must write onto the wood with a normal ballpoint pen. DO NOT USE A PERMANENT MARKER as it will run/smudge. Size- Plain -135mm wide, Measurements go from 36cm -200cm Personalised- 135mm wide, Measurements go from 36cm -195cm with space on top   Cut/Engraved charts are left in natural wood.Mounting: The height chart is best hung using 3m velcro strips (not included).Materials: Bamboo
Walnut Stained Pine Wooden Height Chart - Personalised Growth Ruler - Height Chart
Walnut Stained Pine Wooden Height Chart - Perso... from $109.00
  Personalised Name Age Markers For Height Charts A walnut stained pine wooden height chart handmade by Little Miss Viking in New Zealand. Capture every moment of your child's development with this wooden growth chart. This full size ruler is used to measure your child's growth throughout the months and years of their childhood. If your child is older, don't worry, just take their measurement from all those baby visits at the doctor and mark them on the ruler!Take this with you when you move or give the perfect gift! Each piece is handcrafted using high quality pine wood boards and very close attention to detail! The tick marks/numbers are engraved and you can add a personalisation for free. When adding a personalisation the numbers will be placed going vertical and the text goes along the side.The growth chart measures 180cm[L] by 13.5cm or 18.0cm[W] by 1.9cm[D] - and starts at 20cm and goes up to 2.0 meters. When you measure your family you must write onto the wood with a normal ball point pen. DO NOT USE A PERMANENT MARKER as it will run/smudge.The height chart comes with a saw-tooth hanger on the back that can be mounted on a 3m hook at 195cm off the ground.
Monogram Letter With Name - Laser Cut Name Plaque
Monogram Letter With Name from $29.00
Little Miss Viking monograms are custom-made to show off your family name in style. Our Monogram-Fancy Letter Family Sign wood art is a real attention-grabber. This is a great housewarming gift, wedding gift, newly wed gift or just a great way to make your house even more of a home! We cut your sign with the top of the line laser technology to provide precise cuts and design! The letter size varies on the length of name so the longer the name the smaller the letters will be. These signs are for indoors and look best with 12 character names or less. Easily mount them on a wall with blue-tac or a 3m velcro strip. (not included) Width varies depending on the letter chosen but is normally close to the height.
Monogram Letter With Name Floral Wreath Nude (Unpainted) - Laser Cut Name Plaque
Monogram Letter With Name Floral Wreath Nude (U... from $24.00
A single floral wreath wood monogram creates sophisticated personalized walls and gifts. A wonderful addition to a family home or a girl's bedroom, these single letter floral monograms are decorative yet reserved. These signs are for indoors and look best with 12 character names or less. Easily mount them on a wall with blue-tac or a 3m velcro strip. (not included) Width varies depending on the letter chosen but is normally close to the height. Materials : MDF This is an unpainted therefore unfinished piece designed for you to add your own personal touch to.
Hanging Grandchildren Bamboo Sign - General Signs
Hanging Grandchildren Bamboo Sign from $15.00
A sign that hangs down with a grandchild's first name and date of birth on engraved on each board. The top board reads “Our Grandchildren A Grand Blessing” by default but can be personalised. Each board is customised for you and measures approximately 29.5cm x 9cm. The date format for each board is as pictured on https://littlemissivking.co.nz eg dd.mm.yyyy. When selecting a font it will not change the font of the date/numbers. The header board is 12cm high, allowing for two-three lines of text. Long phrases and text will be shrunk to fit this space. The gap between is approximately 0.9-1cm. The image shown has 4 grandchildren. A great gift for Mother's or Father's Day or when a new arrival joins the extended family. Choose Your FontThe font you select will be used for all names and words. Long names may be shrunk to fit the space available. The dates & numbers will use the default font at all times. Custom HeaderA custom header is available, please add notes to the Names and Dates Of Birth box. ADDITIONAL BOARDS For an extra board, please select "Extra Grandchild - No Header" under Number of Grandchildren. Made in Christchurch, New Zealand.Materials: Bamboo.  
White Wash Wooden Height Chart - Personalised Growth Ruler - Height Chart
White Wash Wooden Height Chart - Personalised G... from $95.00
Personalised Name Age Markers For Height Charts A white wash wooden height chart handmade by Little Miss Viking in New Zealand. Capture every moment of your child's development with this wooden growth chart. This full size ruler is used to measure your child's growth throughout the months and years of their childhood. If your child is older, don't worry, just take their measurement from all those baby visits at the doctor and mark them on the ruler!Take this with you when you move or give the perfect gift! Each piece is handcrafted using high quality pine wood boards and very close attention to detail! The tick marks/numbers are long lasting vinyl and you can add a personalisation for free.The growth chart measures 180cm[L] by 13.5cm[W] by 1.9cm[D] - and starts at 20cm and goes up to 2.0 meters. When you measure your family you must write onto the wood with a normal ball point pen. DO NOT USE A PERMANENT MARKER as it will run/smudge.The height chart comes with a saw-tooth hanger on the back that can be mounted on a 3m hook at 195cm off the ground.
Half n Half Kids Wooden Height Chart - Height Chart
Half n Half Kids Wooden Height Chart $125.00
The "Half n Half" wooden ruler height chart is a handmade, personalised wooden growth chart, designed as a giant modern wooden ruler by Little Miss Viking it takes it this pattern divides itself in half diagonally with great choices of colour to choose from. This wooden height chart makes a truly unique way to create a permanent record of your child's growth and development. Our wooden height charts are family heirlooms in the making because they make original personalised unisex gifts for Christmas, new arrivals, christenings, first birthdays or just because, best of all they can move house when you do no more lost history! By personalising them with a family or last name (rather than the child's first name), they can still be enjoyed if further new additions arrive later on. Being a stylish home accessory as well as being practical, the "Half n Half" wooden height chart does not have to be hidden away in a child's bedroom or nursery and instead can be a centerpiece to the home in a hallway, living area or kitchen. A great family keepsake, this pine height chart is the perfect way to keep track of your growing family. The wooden pine height chart is marked from 20cm to 200cm and is designed to be installed 20cm off the floor enabling plenty of room for skirting boards. A saw-tooth hanger is mounted on the back of the growth chart. We recommend 3m picture hanger as the best method to hook the height chart. This height chart is made in New Zealand.
Popped Wall Name Plaque Free Personalisation - Laser Cut Name Plaque
Popped Wall Name Plaque Free Personalisation from $39.00
Custom made Wall Name Plaque that is great for a children’s bedroom wall or door. The laser-cut wall name plaque is lightweight and sits on a painted wood background popping the text. Getting your one ordered is simple. The height is the measurement from the height of the capital letter's popped background all other letters will be in proportion to this. eg. Harper would be measured from the top of the backing board on the H to the bottom of the backing board on the H. We then adjust marginally to make sure the item will be strong enough to ship. This is for ONE name/ word only, Maximum of 10 letters per name, if it is a hyphenated name two, will need to be ordered. We recommend using removable velcro/picture hanging strips to hang(not included).  
Tractor Name Plaque - Laser Cut Name Plaque
Tractor Name Plaque $29.00
A name plaque with a detailed tractor laser cut out of 6mm wood. A name plaque with a detailed tractor laser cut out of 6mm wood. The total size is approximately 30cmx30cm.  
If Grandad Cant Fix It Were Screwed Wooden Sign - Plywood Sign
If Grandad Cant Fix It We're Screwed Wooden Sign $24.00
A plywood sign that reads "If Grandad Can't Fix it We're Screwed". Several tools are pictured. Dimensions: 40cm x 30cm x 1.8cm (WxHxD approx) It comes with a saw tooth hanger on the back and can be mounted on a 3m picture hook for ease of hanging.
Mums Shit List Solid Pine Sign - Plywood Sign
Mums Shit List Solid Pine Sign $24.00
Mums Shit List is a solid pine sign that any Mum can relate to. The sign reads “Mum's Shit List, Don’t break shit. Don’t fight over shit. Clean up all your shit. Don’t act like a shit but mostly don’t make me lose my shit.” Great as a gift or for yourself. DImensions: 18x25cm and 1.9cm deep. Mount: 3m velcro strips or blutack. (Not included)Made in Christchurch.
Motocross Name Plaque - Laser Cut Name Plaque
Motocross Name Plaque $29.00
A personalised Motocross Name Plaque with the owners name cut out. Please choose one colour from the paint colour chart.  
House Rules sign - Plywood Sign
House Rules sign $24.00
A ply sign that reads- In this house always say I love you Tell the truth be grateful say please & thank you clean up after yourself work hard laugh a lot do your best listen to each other dream big respect others be kind & polite A ply sign that reads- In this house always say I love you Tell the truth be grateful say please & thank you clean up after yourself work hard laugh a lot do your best listen to each other dream big respect others be kind & polite The sign comes with a hanger and can be hung with a 3m hook. It is 30cm x 40cm.      
Family Birthday & Celebrations Boards Pine Engraved - Birthdays - General Signs
Family Birthday & Celebrations Boards Pine Engr... from $79.00
A handmade birthday board complete with 25  natural coloured discs to hang marking important dates for you. Never forget a birthday again or give it as a present to a family member/friend. Made from Pine this board can be wall-mounted and comes with a saw-tooth hanger attached. There are several styles to choose from or create your own text. The birthday board measures 52cmx13cmx2cm (WxHxD) approx.The month's font will not change.The text will be re-sized to fit on one line, the space available works best with text.
Dinosaur Name Wooden Round - Laser Cut Name Plaque
Dinosaur Name Wooden Round from $34.00
These ROARsome (Dad joke included free of charge) wooden name plaques make the perfect door or wall decor for any budding paleontologist or dinosaur lover. There is space for 3-12 letters (One name only) and you can choose any combination of two colours. Darker colours look nicer behind a lighter front colour.A two-layer wooden dinosaur name plaque to be personalised with the owner's name in the middle. Dinosaurs you can choose from (Select as an option above to see an example):BrontosaurusPterodactyl (Two Types)Raptor (Two Types)T-Rex (Two Types)Stegasaurus (Two Types)Triceratops Please choose one colour from the paint colour chart for the background and another colour for the foreground. Dimensions: 10mm (Approx Depth)Materials:MDF Easily mount to a wall with Bluetack or a 3m hook. 
Bamboo Mens Accessory Holder
Accessory Holder $29.00
A place to store all his special things with an Engraved bamboo Accessories Holder. Keep his watch, keys, glasses, phone and wallet safe (wallet fits in holder back), and help him to never lose his keys again, with this clever Father’s Day gift that is both practical and personalised. Professionally laser cut from 3mm bamboo and expertly engraved. This stylish accessory holder perfectly complements any home or office décor. Crafted from two separate pieces so it can be flat-packed for easy storage, this is a unique and thoughtful Father’s Day gift that will definitely come in handy! Personalise with a short caption. eg. "DAD'S STUFF", "PUT YOUR S**T HERE", "BOB'S THINGS" etc. Measures: 19.5cm x 22cm x 15cm (WxHxD)Material: Carbonised Bamboo.
Unicorn Fairy Name Plaque With Free Personalisation - Laser Cut Name Plaque
Unicorn Fairy Name Plaque With Free Personalisa... $34.00
A fairy riding a unicorn with the owners name laser cut out of wood. Dimensions: 410x370x6mm (WxHxD) Easily wall mount with Bluetack or 3m velcro strip
Raised Family Name Established Sign - General Signs
Raised Family Name Established Sign $69.00
Get a beautiful solid wood family name sign featuring raised letters. Spruce up any room in your home or office with custom signs! Made exactly the way you want, these rustic wooden signs make great accent pieces and conversation starters for your guests. Add your own name and date to create the perfect gift your loved ones will cherish for a lifetime. The letters are precision laser cut and stuck onto a natural piece of New Zealand pine. Choose:Paint Colours for letters, Family Name, DateMeasurements: 500mm x 180mm (WxH)Materials: Pine and Painted MDF
My Favourite People Call Me Nana Hanger - General Signs
My Favourite People Call Me Nana Hanger $39.00
This Macrocarpa wooden sign reads: My favourite people call me Nana. It has rope attached and comes with wooden pegs to hang photos or drawings etc on. It has a sawtooth hanger attached to the back for easy hanging. Size is approx 51cmx 15cm x2cm. This Macrocarpa wooden sign reads: My favourite people call me nana. The My favourite people call me Nana photo/art hanger has twine/rope attached across the front under the text and comes with wooden pegs to hang photos or drawings etc on. A sawtooth hanger attached to the back for easy hanging we recommend using a 3m sawtooth hanger to avoid damaging your walls. Size is approx 51cmx15cmx2cm WxHxD. The My favourite people call me Nana photo hanger is a great gift for a grandparent and can be personalised to change the name.
Grandkids Make Life Grand Photo/Art Hanger - General Signs
Grandkids Make Life Grand Photo/Art Hanger $39.00
This solid pine wooden sign reads: Grandkids make life grand. It has rope attached and comes with wooden pegs to hang photos or drawings etc on. It has a sawtooth hanger attached to the back for easy hanging. Size is 51cmx 15cm x2cm.   The Grandkids make life grand photo hanger is a great gift for a new grandparent or an existing grandparent who has everything.
You Are Braver Solid Pine Sign - Pine Sign
You Are Braver Solid Pine Sign $24.00
You are braver than you believe, stronger than you seem, smarter than you think and loved more than you will ever know. A solid pine sign that is great as a gift or for yourself, hang it in a child bedroom or nursery. It measures 18x25cm and 1.9cm deep. Mount with 3m strips or blutack. Made in Christchurch from solid pine.
Monogram Letter Raised Block Letter Name - Laser Cut Name Plaque
Monogram Letter Raised Block Letter Name from $34.00
A single wood monogram creates a sophisticated personalized wall and is a great gift. A wonderful addition to a family home or a boy's or girl's bedroom, these single letter raised monograms are decorative yet reserved. These signs are for indoors and look best with 12 character names or less. Easily mount them on a wall with blue-tac or a 3m velcro strip. (not included) The width varies depending on the letter chosen but is normally close to the height. Personalise with your choice of colours-sides and back are not painted.
Dinosaur Name Wooden Plaque - Laser Cut Name Plaque
Dinosaur Name Wooden Plaque $34.00
A wooden dinosaur name plaque personalised with the owners name in the middle. Please choose one colour from the paint colour chart. Dimensions: 500x300x4.75mm (WxHxD) Easily mount to a wall with Bluetack or a 3m hook.  
Birth Details Solid Pine Sign - Pine Sign
Birth Details Solid Pine Sign $25.00
Birth Details is a solid pine sign that makes a great piece for a nursery or as a gift. Add all the relevant birth details and have a keepsake that will last the test of time. All the text is laser engraved into the wood. Details to add for personalisation: Name Date of birth Time of birth Weight at birth Height at birth Saying. (optional if no saying is listed it will be blank.) All details will be engraved as entered. It measures 18x25cm and 1.9cm deep. Mount with 3m strips or blutack. Made in Christchurch.
Granddad Fix It Solid Pine Sign - Pine Sign
Granddad Fix It Solid Pine Sign $25.00
Granddad Fix It is a solid pine sign to hang in the workshop or mancave. Great as a gift or for yourself. It measures 18x25cm and 1.9cm deep. Mount with 3m strips or blutack. Made in Christchurch.
96

Safe & Secure Payments

Debit Card, Afterpay, LayBuy, Visa & Master Card

NZ Tracked Shipping

Little Miss Viking ships tracked parcels to New Zealand Wide

Made in NZ

Little Miss Vikings products are made in Christchurch
Afterpay American Express Apple Pay Google Pay PayPal Mastercard Visa